Charging your Flo Vac Jr.

• Plug the charging unit into a standard 110 volt outlet.

• Plug the mini plug on the other end of charger into the receiver of the Flo Vac Jr.

• App. 6 hours is required to charge a fully discharged battery.

• It is not necessary to comletely discharge the battery before recharging.

• Use only the charger provided with the unit. Other chargers could cause damage to the unit and will void the warranty.

• Unplug unit from charger.

• Move power switch to the on position.

• Hold unit over loose fill until chamber is full and then hold over loose fill container and turn power off to allow loose fill to fall out.

• Repeat as required.

• Unplug unit from charger.

• Turn unit on and fill chamber with loose fill material.

• Hold unit over box and turn unit off allowing loose fill to fall into box.

• Repeat as required to properly fill box.